6 important points to note when using and maintaining a garbage disposer

Key point 1: Proper use of garbage disposal
Start the machine - drain the water - sweep the garbage into the hole - finish the game and turn off the machine - let the water run for an additional 10 seconds - turn off the water and turn off the machine
Remember not to start the machine after sweeping the garbage, especially for models using AC motors. Due to insufficient starting horsepower, starting the machine after putting the garbage away can easily cause it to get stuck.
Point 2: Properly use the garbage disposal processor to process substances
Although the garbage disposal is easy to use, it is not a panacea. Some foods with coarse fibers that are easily entangled with the processor cannot be processed, such as coarse fiber foods like sugar cane and edamame skin, which can easily get entangled with the processor. Large bones and the like can also easily get stuck in the machine, so it is not recommended to put them into the garbage disposal.

Point 3: Common maintenance problems of garbage disposer - jamming
Don't be afraid if the garbage disposal suddenly stops working. This may be because the turntable is stuck by foreign objects. At this time, we can unplug the power, open the splash cover, and use a screwdriver or chopsticks to poke down along the holes on the edge of the turntable. When the turntable can be turned, reconnect the power and press the reset button to use it normally.

Key point 4: common maintenance problems of garbage disposer - slow sewage
When this happens, it may be that the water pipe is blocked. Remove the blocked part and clean it up.
Key point 5: common maintenance problems of garbage disposer - water leakage
First, identify the location of the water leakage in the garbage disposal unit. Typically, there are two potential sources of water leakage: the head and the body. If the leakage is from the head, simply tighten the disposal unit again until it is securely in place. If the leakage is from the body, disassemble the connecting parts and reassemble them properly.

Point 6: Common maintenance problems of garbage disposal - loud vibration sound
When the processor vibration sound is significantly louder than usual, it may be that the grinding hammer is stuck. Use chopsticks or a screwdriver to turn the grinding hammer to restore its rotation.